A freshly painted working or pleasure vessel looks nice on the surface. It’s important to know what preparation is required prior to the final coat of colourful paint being applied. Ask the professional painters in Brisbane and they’ll give a long list of things that should be looked at, repaired, and refinished before a brush touches the boat’s interior or surface. Think about what a boat faces daily in this part of Australia. Seasonal rain and hot summer days are routine challenges. There’s always the possibility of a scrape from the pier or slip. Floating debris may not surface until it’s too close to avoid. A quality paint job protects boats because it involves more than just adding a coat of your favorite color. The following steps will help your boat remain bay, lake and seaworthy.
1.Prepare for the boat painting project. Nearly 75 percent of the overall time for the project involves preparation. Areas need shielded or draped in addition to various stages of taping, sanding, and dusting. Prep time depends on the status of the boat. The more that needs done the more time must be allotted before the actual painting begins. Be diligent when you clean the parts of the boat to be painted. Repair and fill gouges and dings on the hull, deck and bottom of the boat. Let it dry before progressing to the next step.
2.Select a painting-friendly environment where the boat is covered by a secure shelter, such as a shed or well-ventilated tent. Check the long-range weather forecast to avoid windy, hot, and rainy conditions. Gently sand the areas to be painted. Select the right grain sandpaper for your wooden, metal or fibreglass boat. Use a soft cloth and handheld vacuum to remove the dust.
3.Choose the right time of day to apply primer and paint. Mid-morning gives you time to apply primer where it is needed. That gives it time to dry and lets you take a break during the noon hour when the overhead sun is hot. Then continue until an hour before sundown. As sections dry, resand them and dust them off so they’re ready to paint the following day.
4.Use a brush and roller to apply marine finish paint, which delivers the proper coating for vessels.
5.Lightly sand each coat after it dries and completely remove the dust. Apply the next layer and repeat. Use a clean cloth and denatured alcohol to wipe down the painted areas when the job is completed.
If painting a boat requires more time or skill than you have available, why not contact professional marine Brisbane painters? They’ll inspect your boat so you’re aware of what needs repaired before it’s painted. They have the proper environment, tools, and manpower necessary to complete the job.…